pfc coils document 444-1 1. inductance measured at 100 khz, 0.1 v, 0 adc using an agilent/ hp 4284a impedance analyzer. 2. dcr measured on cambridge technology micro-ohmmeter and coil - craft ccf858 test fxture. 3. current that causes a 40c rise from 25c ambient. these coils were developed specifcally for use with the on semiconductor ncp1653 power factor controller (pfc) for driving continuous conduction mode step-up pre-converters. the c1061-a operates in 150 watt applications. the c1062 - b operates in 300 watt applications and is speci - fed by on semiconductor in application note and8185/d. in addition to the standard parts shown, coilcraft can design custom magnetics with inductance, dcr and cur - rent values to meet your specifc requirements. for more information, contact coilcraft. to request free evaluation samples of these coils, contact coilcraft or visit www.coilcraft.com . part inductance 1 inductance i pk dcr max 2 srf i rms 3 number application 10% (h) at i pk min (h) (a) (ohms) (mhz) (a) c1061-al 150 w 450 405 4.5 0.166 1.4 3.80 c1062-bl 300 w 570 540 6.0 0.226 1.0 3.55 100 200 300 400 500 600 800 1000 0. 11 100 10 inductance (h) current (a) c1062-bl c1061-al 100 200 300 400 600 800 1000 0.01 0. 1 10 1 inductance (h) frequency (mhz) c1062-bl c1061-al typical inductance vs frequency typical inductance vs current for on semiconductor ncp1653 power factor controller document 444-1 revised 12/06/12 4. ambient temperature range: ? 40c to +85c storage temperature range: component: C40c to +125c tape and reel packaging: C40c to +80c 5. electrical specifcations at 25c. us uk t aiwan china singapore +1-847-639-6400 sales@coilcraft.com +44-1236-730595 sales@coilcraft-eur ope.com +886-2-2264 3646 sales@coilcraft.com.tw +86-21-6218 8074 sales@coilcraft.com.cn + 65-6484 8412 sales@coilcraft.com.sg ? coilcraft inc. 2013 this pr oduct may not be used in medical or high risk applications without prior coilcraft appr oval. specification subject to change without notice. please check web site for latest infor mation.
pfc coils for on semiconductor ncp1653 document 444-2 document 444-2 revised 12/06/12 1 12 67 1 recommended pc la y out 1.450 36,80 max 1.450 36,80 max 1.170 29,70 max 0.150 0.030 3,81 0,76 0.0346 0.0005 0,879 0,013 0.875 22,20 0.875 22,20 0.200 5,08 0.150 3,81 ? 0.058 1,47 1.00 25,40 1.20 30,48 0.200 5,08 1 1.50 38,10 max 1.210 30,73 max 0.115 0.015 3,30 0,33 1.00 25,40 recommended pc la y out 0.062 1,58 ? 1 7 1.80 45,72 max 0.029 0,74 1 6 1 7 c1061-al c1062-bl 70 60 50 40 30 20 0 10 t emperature r ise (f ro m 2 5c) current (a rms) 1 03 4 25 c1062-bl c1061-al typical temperature rise vs current eit 64.5 g packaging: 75 per tray weight: 105.7 g packaging: 50 per tray us uk t aiwan china singapore +1-847-639-6400 sales@coilcraft.com +44-1236-730595 sales@coilcraft-eur ope.com +886-2-2264 3646 sales@coilcraft.com.tw +86-21-6218 8074 sales@coilcraft.com.cn + 65-6484 8412 sales@coilcraft.com.sg ? coilcraft inc. 2013 this pr oduct may not be used in medical or high risk applications without prior coilcraft appr oval. specification subject to change without notice. please check web site for latest infor mation.
|
